Emerson Custom Thinline Tele 3-Way Prewired Kit - Premier Pro 250k pots

The Only Difference Between This Kit and Our Standard T3 Prewired Kit is the Spacing. This is A Telecaster Prewired Kit built and spaced especially for Thinlines (Controls Mounted on the Pickguard, NOT the control plate).

**NOTE** Spacing:
- Center of Tone Knob to Center of Volume Knob is 2.00"
- Center of Volume Knob to Center of 3-Way Switch is 2.00"

We build these kits specifically for the thinline setup and spacing. If your volume and tone knobs are 2.00" (center to center of knob) Than this kit will work for you. If your knobs are under 2.00" apart in spacing this kit will still work... Simply use your thumb and create a slight inward radius (curve) on the teflon coated buss wire towards the center of the wiring kit to shorten the buss wire length allowing for a shorter control knob spacing.

• Handwired in the USA
• Features the new & improved Emerson PREMIER PRO Potentiometers

Description

Our 3-Way tele kits are our most popular prewired kit.. and for good reason; They improve your tone! We take great pride in using premium components that work and sound better than stock electronics found in your guitar. Our pots are hand metered and matched for great consistency and even taper on both the volume and tone knob (better control when rolling down the volume knob... no more mud) Our Emerson Paper in Oil capacitors sound amazing! Paper in Oil capacitors were used in vintage Fender and Gibsons for good reason... They sound amazing. Our kits are painstaking wired by hand one at a time in Bixby, Oklahoma, USA. We take great pride in our solder work and neatness when we craft our prewired kits. We build our kits to last a very long time and perform great. We think you will appreciate the detail both sonically and visually that goes into each and every one of our prewired kits.

This is a 3-Way Thinline Tele prewired assembly for Thinline Telecaster style guitars featuring 2 single coil pickups. It will drop into most American Fender Thinline Teles with no modification.

Wired with 22 AWG vintage push-back wire for that vintage look and sound. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life. If you are installing this on an import guitar with metric sized pots you may need to ream your control plate holes to accept the slightly larger US-Spec pots and buy US-Spec knobs.

Includes

• (2) Emerson PREMIER PRO Solid Shaft Shaft Pots
• (1) Oak Grigsby OR Centralab 3-Way Switch 
• (1) Switchcraft 1/4" Mono Input Jack 
• (1) 0.047uf Emerson Paper in Oil Capacitor *(0.022uf are used with 500K-Ohm Pots Option)* 
• (1) Volume Mod 
• Wiring Diagram

**Pickguard / Control Plate, Switch Tip or Knobs Not Included**