The Dan Armstrong Purple Peaker EQ on-board effect. FREE shipping anywhere in the USA!

The Purple Peaker is an EQ for guitar or keyboard which introduces one or two peaks into the frequency response at specially selected frequencies. It has a three position switch to select one, both, or neither of the two peaks. In the "1" position, the Peaker introduces a 12 db peak centered at 4000 Hz which gives the instrument more "presence" or "bite". In the "2" position it produces the same presence peak plus a 7 db peak at 200 Hz to give the instrument more bottom or "punch". In the "Off' position neither peak is produced, but the guitar's signal is still improved, since the Peaker's low impedance 200 ohm Output eliminates signal loss and hum pick-up, even with very long cables. The Purple Peaker makes weak-sounding instruments sound fuller, and full-sounding instruments sound super. It is also excellent for musicians who want to record themselves by plugging directly into a tape mach­ine without going through an amp.

All Dan Armstrong effects are hand made in the USA and are built in a sturdy, attractive aluminum housing with only the finest quality components.

Input Impedance: 100 k Ohms
Signal/Noise ratio: 90db
Dimensions: Dimensions: 2.33 in (59 mm) wide x 2.33 in (59 mm) high x 2.75 in (70 mm) deep (the unit protrudes only 1.7 in (43 mm) from the face of a guitar).
Weight: 4 1/2 oz, including battery.
Power Source: One 9 volt battery (included).

E-mail a friend about this item.

Join our mailing list